Stock Transfer
Home Trip Interface Piece Picking Load Unit Picking Load Unit Verification Truck Loading Stock Transfer Inventory Audit

The Stock Transfer facility controls the flow of product from plant or vendor to warehouse and between warehouses. The specification of stock transfer requests can be imported from external systems such as order entry or procurement systems or entered interactively. The following demonstration shows the RF based facilities for picking and receiving stock transfers.

Pick Transfer

The Pick Transfers Function is selected

 stp1.jpg (24724 bytes)

"A" is entered to Add a Stock Transfer Trip at the trip list display

 stp2.jpg (21504 bytes)

System assigns the Trip ID and the load unit type from parameters

 stp3.jpg (19699 bytes)

A load unit(crate) barcode ID is scanned and the number of sku's in the loading unit is added to the trip

(3) indicates the number of a given sku loaded on the trip

 stp4.jpg (19977 bytes)

Entering the ID initiates loading from a different type of loading unit

 stp5.jpg (20812 bytes)

This type of loading unit requires specification of the number of sku's to be loaded

 stp6.jpg (21462 bytes)

"X" is entered upon completion of loading the truck

 stp7.jpg (22252 bytes)

The Trip(W11653) has been added to the list of active trips and is now available to be used for control of the receiving function

 stp8.jpg (21951 bytes)

The truck is now loaded and ready to go to the receiving point.

The same control procedure is utilized to control trips within or between warehouses that may not require the use of a truck

 stru1.jpg (78025 bytes)

  Receive Transfer

The Receive Transfers Function is selected

 str1.jpg (23317 bytes)

The trip created above is selected to be received

 str2.jpg (20819 bytes)

As each item is removed from the truck it is scanned and the corresponding total received is shown in brackets

 

 str3.jpg (20840 bytes)

Upon completion of receiving an "X" is entered to exit the receiving list

 str4.jpg (22160 bytes)

A confirmation prompt is presented for the completion of the receiving process

 str5.jpg (23009 bytes)

The Trip record (W11653) has now been removed from the list of active Stock Transfer Trips

 str6.jpg (22658 bytes)